Metallic Foil Flyers

Once you have placed your order you can upload your print ready artwork. 

For double-sided cards with special finishing please supply your artwork as a 4-page PDF. Page 1 is the front, page 2 is the back, page 3 will be the Foiling artwork and page 4 should be blank.
If you are printing a one-sided PVC card with finishing, then a 2-page PDF is required where page 1 is the design and page 2 is the Foil artwork.

Foil artwork must be solid black shapes in the exact position where the Foil is to be applied. Please ensure Foil artwork is a vector path, 100% black only.

Please note: Foil application has registration tolerances of approximately ±0.5 mm. It is not recommended that small text (10pt minimum) or thin lines (1pt minimum). We advise against representing your foiling within your CMYK artwork. Slight misalignment of the foil could result in lines or 'shadows' of this foil representation being visible on your final product

Include 3mm bleed on all sides
Supply as a CMYK PDF, preferably in PDF/x1a format
Outline or embed fonts
300dpi resolution
We recommend that any foil is at least 3mm from the trim edge to achieve the best results.
Vector foil graphics will produce better results than bitmaps. Bitmap foil graphics should be supplied in 300 dpi for best quality results.
The minimum font size is 10pt and line weights should be at least 2pt.
Serif fonts are advised against as the serifs may contain elements that are not 2pt in thickness.

ARTWORK TEMPLATES